How To Burn Copal Resin Without Charcoal

Download Article

Download Article

Burning resin incense is a bully way to fill up your home with fragrance. The most popular way is to burn information technology using charcoal. Unfortunately, this produces a lot of smoke, which can cause breathing problems for some people. Fortunately, there is a safe and like shooting fish in a barrel way to burn resin incense with little to no smoke.

1. 1

   Become an aromatherapy oil warmer. At that place are ii unlike types of oil warmers that you tin can utilise: ceramic and drinking glass. The ceramic oil warmers are all ane piece while the drinking glass ones are commonly a glass dish set on superlative of a metal or ceramic stand.^[1]

   • You lot can purchase these in but most any store that sells candles and candle stands.
   • The ceramic oil warmers are typically labeled for wax cubes or wax melts, but they will still work. The set up is notwithstanding the same.

2. 2

   Pour a small amount of vegetable oil into the dish. How much oil you use will depend on the size of the dish. Typically, this will be around 1 to two teaspoons. Yous want to merely fill the dish a little less than halfway.^[two]

   • You can utilise other types of liquid oil, such equally olive oil or sunflower seed oil. These will add some fragrance to the burning incense. Vegetable oil has lilliputian to no fragrance.
   • Thick oils, like argan, jojoba, and coconut are not good choices. Essential oils are non a adept pick either, considering you won't smell the incense anymore.
   • You must put some oil into the dish, otherwise you risk the dish condign as well hot and cracking. Don't use water as it will evaporate.^[three]

   Advertising

3. 3

   Add together some resin incense into the oil. If your resin came in powdered form, y'all'll need 1 small-scale scoop, which is roughly 1 teaspoon.^[4] If it came in chunks, use a few pea-sized pieces instead.^[v]

   • At that place are different types of resin incense coming from different trees, such as bister, copal, frankincense, and myrrh.^{[half dozen]}

4. four

   Lite a tea light and put it into the oil warmer. You tin put the tea low-cal into the oil warmer start, then lite information technology with a candle lighter instead--the long, slender pole volition fit into the candle warmer. If y'all just have matches or regular lighters, lite the tea light first, then carefully put information technology into the oil warmer.^[7]

   • Don't use a votive candle. They are also tall. Yous need to use a tea light.
   • Apply an manifestly, unfragranced tea low-cal, otherwise the aroma will mix with that of the incense.

5. five

   Let the oil heat upwardly. How long this takes depends on the size of the oil warmer, what material it is made from, and how much oil y'all used. Typically, this will only take a few minutes, but it may accept longer.

   • As the oil heats up, the resin will rut up likewise and release its scent.
   • You'll know when the oil is hot enough once you start to smell the resin. Once the oil is hot enough, you lot don't need to do anything.

6. 6

   Extinguish the candle when you are done. Y'all can also let the candle continue burning until it extinguishes itself. Near tea lights volition burn for four hours, just you can get long-lasting ones that burn down for up to 6 hours.

   • Never exit the oil warmer unattended. Even though this method is nevertheless relatively safe, you are working with an open up flame.

7. 7

   Supercede the incense and oil afterwards iii to 4 days. If y'all fire the incense daily, y'all will need to replace it later on 3 to iv days. At this point, it would be a good idea to add together more oil as well. If you aren't going to use the oil warmer for a while, empty the bowl, and so wipe it clean with a paper towel.

   • You don't have to employ the incense every day.
   • Accident out the candle and let the oil warmer absurd completely before you clean it.

Advertizement

1. one

   Find an empty soda tin and clean information technology. Fill up the soda can with h2o and 1 pump of liquid dish lather or hand soap. Slosh the water in the tin, then dump information technology out. Rinse the can out when you are done.

   • Yous tin too use other types of drink cans, merely be aware that they may be made from thicker metal and will be harder to cut.
   • You demand to use a drink with a bowl-shaped bottom. Do not use a regular tin, like from canned beans or soup.

2. 2

   Cut the can in one-half with a craft blade, and then discard the height half. If y'all need to, depict a guideline around the tin get-go; you tin also use tape or a rubber ring. Endeavor to be every bit neat and even as possible, otherwise the oil burner won't stand straight.^[8]

   • It would be fifty-fifty better to cut the can two-thirds of the way from the bottom. This will allow yous to trim the tin can without cut also much off.
   • Discard the top half of the can and keep the bottom half.

3. 3

   Trim off any sharp edges, and so cover them with masking tape. Use scissors to cut off whatsoever sharp edges along the elevation edge of the bottom half of the tin. Stand information technology upside down on a table to ensure that it sits direct, not crooked.^[nine]

   • The bottom part of the can needs to be facing up. It will go the basin part of the oil warmer.
   • Make sure that the tin can is dry on the inside. If it is clammy, dry it off with a paper towel. Be careful of the abrupt edges.

4. 4

   Cover the cut edge with masking tape. Wrap a strip of masking tape effectually the cut edge of the can. Brand sure that the lesser half of the tape is on the tin, and the summit half is sticking out over the cut edge. Carefully fold the backlog tape over the cut edge and into the can.^[10]

   • You tin can use painter's tape, a narrow strip of duct tape, or fifty-fifty electrical record.
   • This tape volition cover upwardly the cut edges of the can and foreclose information technology from accidentally cut you.

5. 5

   Cut 3 to iv V-shaped holes into the sides of the can. Employ a craft blade to cut 3 to 4 V-shapes into the can first; make sure that they are evenly-spaced. Adjacent, utilize a pencil or skewer to poke these notches into the can and create triangular holes.^[11]

   • It does not thing if the V-shapes are pointing up or downwardly. Their purpose is to let air to reach the flame and provide oxygen.
   • The size of the 5-shapes doesn't really matter, just something around ¹⁄₂ to i inch (i.3 to ii.5 cm) would be ideal.
   • Don't use your finger to poke the V-shapes into the tin, or you take a chance cutting yourself on the sharp metal. Employ a pen or a pair of closed scissors, if you lot have to.

6. half dozen

   Poke some holes into the bottom of the tin can. Flip the can over then that you lot can encounter the bowl-shaped bottom. Make sure that it is on a stable surface, then use a nail and hammer to punch a hole in the center of the bowl-shaped bottom.^[12]

   • Y'all can add three to iv more holes around the outset hole. Brand sure that they can all fit under a tea low-cal.

7. 7

   Calorie-free a tea calorie-free and set the can over it. Set a tea light on a heat-rubber surface that's big enough to hold the can also. Fix the can over it and so that the basin-shaped bottom is facing upwardly.^[13]

   • Don't utilise a votive candle; it is also tall.
   • Avoid using fragranced candles, or you won't smell the incense.
   • The surface must be heat-rubber, such as a ceramic plate. Do not use this on a wooden table or a tablecloth.

8. eight

   Make full an empty tea low-cal with oil and resin, so identify it over the bowl. Observe a spent, empty tea light. Articulate out any excess wax, then fill it no more halfway with oil and resin. Set it over the bowl of your homemade oil warmer.^[14]

   • Never put oil and resin directly into the bowl.
   • Employ a cooking oil, such every bit vegetable oil. Don't apply essential oil.
   • You can also put some foil over the bowl and brand a modest dip in it and so that information technology becomes bowl-shaped merely doesn't actually conform to the shape of the bowl.
   • You can reuse this oil warmer every bit many times equally you lot want, as long every bit it stays make clean and intact. Once it gets dented, discard it and make a new i.

Advertizement

Enquire a Question

200 characters left

Include your electronic mail accost to become a message when this question is answered.

Submit

Advertizement

• At that place are different types of resin, such equally copal and frankincense. Experiment to discover the i that yous similar.

• If you want to apply a fragranced tea light, make sure that the odor works volition with that of the resin.

• Vegetable oil is the best oil to utilise because it hardly has any fragrance. You can experiment with other types of oils, however.

Show More than Tips

Advertisement

• Never go out the incense unattended. Make sure that the surface you are using the oil warmer on is rut-condom.

• Burning incense irritates your lungs, so keep your windows open and run an air purifier. Information technology's besides all-time to employ incense made from natural scents rather than chemic fragrances.

Advertizement

Things Y'all'll Demand

• Oil warmer
• Carrier oil (i.due east.: vegetable oil)
• Resin incense
• Tea light
• Candle lighter

• Empty soda tin can
• Craft blade
• Scissors
• Masking record
• Empty/spent tea light or aluminum foil
• New tea lite
• Hammer
• Nail

About This Article

Article Summary X

To burn down resin incense without charcoal, you lot can make an incense burner using an old soda can and a tea lite candle. Start by cleaning out the soda tin and carefully cut it in half. Utilise pair of scissors to trim off any sharp or uneven edges, then encompass them with masking tape so you don't cutting yourself. Afterwards y'all've done this, have the peak half of the tin and cut 3 to 4 V-shaped holes into the side of the can. This volition allow air to reach the flame inside. For additional air menstruum, poke some holes into the top of the can with a hammer and nail. When you're set to burn down your resin, light a small unscented tea candle, and place it underneath the can. Once information technology'south lit, take an old tea light candle, articulate out whatever excess wax and fill up information technology halfway with vegetable oil and resin. Then, place this on top of the can where it will warm and lengthened into the room. To larn how to apply an oil warmer to burn down resin incense, read on!

Did this summary help you?

Thanks to all authors for creating a folio that has been read 166,824 times.

Did this article aid you lot?

Source: https://www.wikihow.com/Burn-Resin-Incense-Without-Charcoal

Share this post